Description:
The VIP-802-D2-TS2 series "MegaTouch"™ 2 Port Dual-Head DVI Serial Touch Screen Switch allows two serial touch screen DVI video monitors to be switched between two PCs or Servers. It is the ideal solution for serial touch screen DVI monitor applications requiring access to two computers, without the clutter and expense of additional touch screen monitors. The VIP-802-D2-TS2 series supports all serial touch screen monitors, including those from 3M, MicroTouch, ELO.
The unique architecture of the VIP-802-D2-TS2 series 2 Port Dual-Head DVI serial Touch Screen Switch ensures error-free boot up and device driver loading for each connected PC, and allows the MegaTouch to operate transparently with all PC operating systems, and applications.
The VIP-802-D2-TS2 series 2 Port Dual-Head DVI Serial Touch Screen Switch comes in a variety of standard configurations, is compact in design, easy to install and operate, and is ideally suited for desktop use. For applications requiring rack mounting, an optional 2U height rack mount tray is available (see Accessories). The VIP-802-D2-TS2 series is also available as a Single-Head Serial Touch Screen Monitor Switch.
The VIP-802-D2-TS2 series 2 Port serial dual-head DVI Touch Screen Switch was designed and manufactured in the USA for use around the world for enterprise mission-critical applications and is backed by a Limited 3-year Warranty.
For more information on this product or our complete line of KVM solutions, please contact us at sales@vetra.com
Operation:
On all VIP-802-D2-TS2 series "MegaTouch"™ serial DVI Touch Screen Switch models the active PC is selected by either front panel switches or remotely via RS-232 serial commands.
Direct Entry models (as indicated by -DE in the model number) have an individual push button for each PC channel. Non-DE models have a single push button (NEXT PC) which toggles between the two connected PCs. Both models can be switched, via RS-232 serial commands, using the remote control connector (DB9 male) located on the back panel of the unit (see Connections and Specifications below).
On all models, the selected PC channel is indicated by an illuminated LED on the front. Additional LED's indicate which PCs are powered.
|
Features:
-
Designed and manufactured in
the USA for use around the world
- Backed by a Limited 3 Year Warranty
-
Supports all popular serial DVI Touch Monitors, including MicroTouch, 3M and ELO.
- Models available to
support Single-Head DVI
video,
and up to four DVI monitors by special order
- The MegaTouch™ is completely transparent
to all PC's, operating systems, and programs
- Each PC boots error free, and
PC's can be powered up or down in any sequence
- Uses inexpensive standard cables,
eliminating the need for costly multi-port cables
- A 2U height rack mount tray
is available for rack mount installation
|
Connections:
Standard DVI-D Male-Male video cables are used to connect
to the DVI video ports of PCs. Standard
DB9 Male-Female cables are used to connect to the serial ports
(for touch screen data) of the PC's. Using standard cables eliminates the
need to replace an entire multi-port cable if one connection
is damaged or fails, thereby reducing the overall cost of maintenance.
You may use your cables, or ours (see Accessories
). The cables that are part of the serial touch screen monitor are used to connect these devices to the MegaTouch.
The Remote Control (RS-232 control) connector is a DB9 male with serial data transmitted to pin-2 (pin-5 is ground) @ 9600 baud. Data format is: one start bit, eight data bits (LSB first), one stop bit, no parity. Selection codes are: Hex 31 = PC#1, Hex 32 = PC#2.
Specifications:
Dimensions for the VIP-802-D2-TS2 and VIP-802-D2-TS2-DE Touch Screen KVM Switch are 3.38 in H x 6.06 in W x 6.32 in D (8.59
cm x 15.39 cm x 16.05 cm). The housings are molded
of black GE Cycolac-T, a high impact ABS material, and is internally
shielded with an acrylic base nickel coating for RFI attenuation.
Front and rear panels are fabricated from .062 in thick aluminium
and finished with low gloss paint. All VIP-802-D2-TS2 Dual-Head Touch Screen
switch models are powered from the included power supply. FCC
and CE marked. Shipping weight is less than 3 lbs per unit. |
|
Environmental |
Operating Temp:
Storage Temp: |
5 to 104 deg. F
(-15 - 40 deg. C)
-4 to 122 deg. F
(-20 - 50 deg. C) |
|
Supported
Hardware |
Computer:
DVI Touch Screen Monitors:
Maximum Resolution:
Peripherals: |
PS/2 or USB
DVI-D
up to 1920 x 1200
Serial Touch Screen |
|
MegaTouch is a trademark of
Vetra Systems Corporation Copyright © 1995-2011 by Vetra
Systems Corporation All Rights Reserved |
For user instructions in PDF format.
 For a copy of Adobe's Acrobat® Reader".
|
