|
Congratulations
on your purchase of a VETRA USB MegaCastPlus! This quality product
is designed and built by us in the USA for use around the world
and is backed by a VETRA Three-year Warranty and unlimited free
technical support. We invite your comments, please email us at
sales@vetra.com or call us at the numbers given at the end.
FEDERAL
COMMUNICATIONS
COMMISSION
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user's own expense.
CE
This equipment has been tested and found to conform to the directives and standards for a Class A Information Technology Equipment type and for the Commercial Light Industrial equipment class.
INTRODUCTION
There are two models in the USB-845 MegaCastPlus™
series:
The USB-845-BC USB Keyboard or USB Mouse
Broadcaster-Multicaster
connects either one USB keyboard or one USB mouse to up to five
PC's simultaneously.
The USB-845-KM-BC connects both
a keyboard and a
mouse to up to five PC's simultaneously.
In both units, the keyboard and/or mouse are routed simultaneously
to all connected PC's. Both models allow one hub between the input
devices and the Broadcaster-Multicaster. The hub may be external
or built into the keyboard, but only one device may be connected
to the hub for the USB-845-BC and two devices for
the USB-845-KM-BC.
Both models feature user-controlled Inversion Multicasting,
where PC #1 is excluded from multicasting. Multicasting remains
active for PC's 2 - 5.
Both keyboard/mouse Broadcaster-Multicaster models come with the
VIP-210 power supply.
Note: The "MegaCastPlus" does not come with USB connection
cables. One cable per PC is needed for the USB-845-BC, and
two cables per PC are needed for the USB-845-KM-BC. They may be
ordered from Vetra separately.
Before connecting
PC's to the Broadcaster-Multicaster, make sure the
Broadcaster-Multicaster
is powered by its Power Supply! The PC's may be powered or not
when you connect them to the Broadcaster-Multicaster. Keyboard
and/or mouse may be connected to the Broadcaster-Multicaster at
any time. Do not power down the Broadcaster-Multicaster while
any PC is connected to the Broadcaster!
There
are three
main steps to make the Broadcaster-Multicaster ready for use:
1. Power Up:
First, connect the power supply included with the
Broadcaster-Multicaster
to the Power Jack, marked "+5VDC IN", on the back panel
of the Broadcaster. Note that the front panel "PWR ON"
indicator on the Broadcaster is on. When powering up or connecting
the PC's, note that the appropriate "PC STATUS" indicator
on the front panel comes on.
2. Connect PC's to Broadcaster-Multicaster unit:
For the USB-845-BC: Connect any available USB input on the
PC's to the Broadcaster-Multicaster using USB A-B cables. Connect
PC #1's USB port to the back panel connector of the
Broadcaster-Multicaster
marked "PC1". Connect USB ports of PC's #2 - #5 to the
back panel connectors marked "PC2" - "PC5".
The Broadcaster-Multicaster will operate with less than all five
PC's connected.
For the USB-845-KM-BC: Connect any available USB
inputs
on the PC's to the Broadcaster-Multicaster using USB A-B cables.
Connect PC #1's USB ports to the back panel connectors of the
Broadcaster-Multicaster marked "PC1 KBD" and "PC1
MSE". Connect PC's #2 - #5 USB ports to the back panel connectors
marked "PC2 KBD" and "PC2 MSE" - "PC5".
The Broadcaster-Multicaster will operate with less than all five
PC's connected.
3. Connect Keyboard and/or Mouse to Broadcaster-Multicaster
unit:
For the USB-845-BC, connect a USB keyboard or mouse to the
Broadcaster-Multicaster at the front panel marked "DEVICE
IN". Note that to select inversion multicasting, a keyboard
is required. Therefore, if a mouse is used with the USB-845-BC,
inversion multicasting cannot be selected.
For the USB-845-KM-BC, connect the USB keyboard to
the
Broadcaster-Multicaster at the front panel marked "KBD IN"
and the mouse to the front panel connector marked "MSE IN".
OPERATION
Selecting
Inversion Multicasting:
The Broadcaster-Multicaster
powers up in multicasting mode. Keyboard and/or mouse data goes
simultaneously to all PC's. To select/cancel Inversion Multicasting,
hold down the Scroll Lock key, then:
Mechanical
Dimensions
|
|
|
|
|
|
|
|
|
|
Environmental
Operating
Temp: 5
to 104 deg. F (-15 - 40 deg. C)
Storage
Temp: -4
to 122 deg. F (-20 - 50 deg. C)
Supported
Hardware
Computer:
Computer
with USB port(s); two ports are needed for USB-845-KM-BC
Peripherals:
USB
keyboard and/or USB mouse. Can be connected via one hub, including
keyboard built-in hub.
FEDERAL COMMUNICATIONS COMMISSION
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CE
This
equipment
has been tested and found to conform to the directives and standards
for a Class A Information Technology Equipment type and for the
Commercial Light Industrial equipment class.
The Vetra USB-845 series USB Keyboard/Mouse Broadcaster/Multicasters
use technology covered by US Patent 7,246,189
MegaCast™ and MegaCastPlus™ are trademarks of Vetra
Systems Corporation
Copyright © 1995 - 2009 by Vetra Systems Corporation. All
Rights Reserved. Printed in USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
275 Marcus Blvd. Ste-J Hauppauge, NY 11788-2022 USA Toll Free 1.800.537.9296 Tel: 631.434.3185 Fax: 631.434.3516 e-mail: sales@vetra.com |