|
|
|
|
|
 |
 VIP-802-V-TS |
   |
|
Description: The VIP-802-V-TS "MegaTouch""
Serial Touch Screen Monitor Switch allows one or two touch screen
monitors to be switched between two PCs. It is the ideal solution
for touch technology switching applications where recovering
valuable desk / rack space and reducing the clutter and expense
of redundant monitors is desired. The VIP-802-V-TS utilizes Vetra's
unique electronic switching circuitry which supports full touch technology
functionality while providing
crisp, clear video resolutions of up to 1600 by 1200 at 75Hz.
Inexpensive touch screen switches may use mechanical switches
to switch video signals and touch screen data, which over time
and repeated usage can result in signal degradation or signal
loss due to mechanical fatique or oxidation of contacts. The
VIP-802-V-TS Touch Screen Monitor Switch is a fully integrated
electronic switch and can be counted on to provide years of dependable,
uninterrupted service. All Vetra Touch Screen Monitor Switches are designed and manufactured in the USA for use around the world for enterprise mission-critical applications and are backed by a Limited 3-year Warranty. For more information on this
product or our complete line of KVM solutions, please contact
us at sales@vetra.com OPERATION: The active PC is selected by either front panel switches or remotely via RS-232 serial commands. The VIP-802-V-TS-DE (Direct
Entry model)
has individual push button switches on the front panel for each
selectable PC channel. Depressing a push button switches the
connected monitor to the corresponding PC. The VIP-802-V-TS has
a single push button (NEXT PC) which toggles between the two
selectable PC channels. Both models can be switched, via RS-232 serial commands, using the
remote control connector (DB9 male) located on the back panel
of the unit (see connections and specifications below). |
Features:
|
Models:
 VIP-802-V-TS-DE |
 rear view VIP-802-V-TS (all models) |
|
|
Connections:Standard HDD15 Male-female video
cables are used to connect to the video ports of the PC's. Standard
DB9 male-female cables are used to connect to the serial ports
(for touch screen data) of the PC's. You may use your cables,
or purchase them directly from Vetra Systems (see Accessories
). The captive (or included with device) cables that are part
of the touch screen monitor are used to connect that device to
the MegaTouch. The Remote Control (RS-232 control) connector
is a DB9 male with serial data transmitted to pin-2 (pin-5 is
gnd) @ 9600 baud. Data format is: one start bit, eight data bits
(LSB first), one stop bit, no parity. Selection codes are: Hex
31 = PC#1, Hex 32 = PC#2. Dimensions for both models of the VIP-802-V-TS Touch Screen KVM Switch are 3.38 in H x 6.06 in W x 6.32 in D (8.59 cm x 15.39 cm x 16.05 cm). The housing is molded of black GE Cycolac-T, a high impact ABS material, and is internally shielded with an acrylic base nickel coating for RFI attenuation. Front and rear panels are fabricated from .062 in thick aluminium and finished with low gloss paint. All VIP-802-TS Touch Screen KVM switch models are powered from the connected PC's keyboard and mouse ports, so no external power supply is required. FCC and CE marked. Shipping weight is less than 3 lbs per unit. |
| Environmental |
Operating Temp: Storage Temp: |
5 to 104 deg. F
(-15 - 40 deg. C) -4 to 122 deg. F (-20 - 50 deg. C) |
| Supported Hardware |
Computer: Touch Screen Monitors: Maximum Resolution: |
IBM PC/AT, PS/2
and 100% compatibles 3M, ELO and compatibles in VGA, SVGA modes up to 1600 x 1200 at 75 Hz |
| MegaTouch is a trademark of Vetra Systems Corporation Copyright © 1995-2003 by Vetra Systems Corporation All Rights Reserved | ||
For user instructions click here.
For user instructions in PDF format.
For a copy of Adobe's Acrobat® Reader".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
275 Marcus Blvd. Ste-J Hauppauge, NY 11788-2022 USA Toll Free 1-800-537-9296 Tel: 631-434-3185 Fax: 631-434-3516 e-mail: sales@vetra.com |
